Install & Set ARH Combo Smart - RFID Passport Reader Driver - VIZ License Feature
|
|
Install & Set ARH Combo Smart - RFID Passport Reader Driver - VIZ License Feature
Virgo Technical Support team welcomes all inquiries and is ready to provide free technical support to install and set the reader, through direct access to technical support:
To download e-Passport reader’s driver, follow this link and choose ARH Drivers as shown: For New Combo Smart : https://downloads.virgo-sy.com/arh/pr-2.1.8-win-CD.zip For Old Combo Smart : https://downloads.virgo-sy.com/arh/pr-2.1.7-win-CD.zip For Oldest Combo Smart : https://downloads.virgo-sy.com/arh/pr-2.1.5-26V.zip Also ARH Combo Scan We follow the following steps for the reader: - Open download folder and run setup file Note: If your windows system type is 64Bit operating system, you must install 32Bit version and 64Bit version in addition to install SmartCard driver - If this window appears, click yes - Following window will appear, click I Agree - Select all checkboxes and click Next - Setup will start - When installation complete, click Finish - To Install SmartCard driver, return main window - This window will appear Click Next - License Agreement window will appear, choose I accept Then click Next - Click Install - Install will start - When installation complete, click Finish Note after installation complete, plug-out & plug-in the reader from electricity
RFID Feature : Using to insert personal photo without watermark , which stored in passports slice Notice : Some of Passports Reader have that RFID feature and other not support it
To prepare ARH reader within Virgo Offline
Choose an Internal Reader Application and RFID will be activated we enter the System settings from Others menu or directly from the main window,and from General tab we choose passport reader as ARH ComboSmart, then we choose Internal Reader Application and click OK Notice : You can activate and deactivate RFID feature from passport card VIZ Feature
Notice : This feature for some type of passports , that depend on the license that you are buy
It's limited feature from ARH , have time and date licence , this licence for ARH Reader version after 2017 must had licence and it's activate by License Manager not for old version before 2017 but it's activate by Dongle USB and install it to activate the licence We will open license manager 2- Clear all old license(s) from your device unless instructed otherwise by ARH Support Team 3- Browse the directory where you have you license files stored 4- Select the folder that contains the license files you want to upload 5- By enabling the " Auto upload licenses for new devices " option , licenses will uploaded automatically according to one of following logic: a. Last licenses: Automatically upload the latest license file for the connected device ( license update ) b. Best licenses: Automatically upload licenses that provide support the maximal number of regions ( license upgrade )
6- Click [Upload licenses] to copy the selected license(s) to your device and check their presence in the 'Licenses' textbox:
7- Successful license upload is indicated by a summary as seen below. Then install OCR Engine for VIZ After installing we will open Full Page Reader and Open OCR tab then Choose new OCR that we installed we can check the VIZ from VIZ tab in Full Page Reader Feature working by choosing External Reader Application after choose OCR from Full Page Reader we will close it and open Virgo then go to Settings and choose Passport Reader " ARH ComboSmart " and Reader Application " External "
then open Virgo Passport Reader Link , you can download it from https://downloads.virgo-sy.com/arh/Reader.exe Then open group and insert passport , Birth place will appear like in passport
| |
|